2DI4 (formerly Je-DI) is a dream come true for bass players, as well as guitarists who record direct and use an amp simultaneously. It can also be used to yield character to any string instrument with a pickup (like pedal steel!), to make keyboards sound warmer, even to improve the sound of music players.And because it has both line and mic level balanced outputs, which can be used at the same time, it can drive a variety of inputs.
As with the Creamer, a single pentode is the only gain stage. The high and low frequency boost circuits use high quality capacitors and inductors to impart fatness or top end to your signal in a very musical way. A buffered “thru” output enables a long cable connection with your amp, without a high end roll-off.
A special DI transformer brings the output down to mic level, to drive consoles. A balanced line level output is also there for direct recording. We think this is the absolute state of the art in direct boxes.
2DI4 Pentode Direct Box – CAD 850.00 Buy Now
Please click here for 2di4 sound samples. They are on a separate page.
In the meantime… The 2DI4 has already hit Vancouver’s studios, clubs and players.
At the Warehouse studio, Boris dropped one off just as an important session was starting. They had already figured out their bass guitar recording setup so the 2DI4 wasn’t supposed to get much, if any use. But when they tried their trusted DI workhorse (yes, it’s the most famous one!), somehow the tone was a bit thin, plus there was a lot of noise…They switched over to DI box #2 (another famous unit). Dissatisfied again, they patched in the 2DI4, and just couple seconds after the first bass note was plucked, a few jaws dropped! Needless to say, it was the DI of choice for the rest of the session.
Now everybody and their dog wants one!Download 2DI4 Manual (PDF)
Design concept: (tube) pentode hybrid preamp
2 tube modes: triode and pentode
Frequency response: 10Hz-50kHz +/-3dB
Maximum gain: 54dB at the line output, 32dB at the DI (mic level) output
Harmonic distortion: <2% before clipping level, quickly decreases if driven less.
Maximum output level: 22dBu
Minimum output load: 600Ohms
Connectors: XLR DI and line output, balanced only
Instrument input: 1/4” unbalanced, mono
Input impedance: 2.2MOhm
Amp: 1/4” unbalanced, mono, buffered
Power consumption: 15W
Operating voltage: 110-120VAC or 220-240VAC, switchable
All supply voltages regulated.
285V Plate voltage for huge headroom
Gold plated printed circuit boards with a double copper layer.
Gold plated tube socket
Sonic Farm gives a one year warranty on parts and labor from the date of purchase. Should you need to send in your unit for warranty covered service, please ontact us for an RMA number first. Any Modification of the unit voids the warranty.